- Fly monolith partition walls
Technical Data - Summarizing Catalog
- Technical Description
have a total thickness of 101 mm, and are composed of two crosspieces in pre-painted 8/10 steel fixed to the floor and ceiling with expansion plugs, or with double-sided adhesive tape if no holes can be drilled in floors.
have a total thickness of 101 mm, and are composed of two crosspieces in pre-painted 8/10 steel fixed to the floor and ceiling with expansion plugs, or with double-sided adhesive tape if no holes can be drilled in floors. Inside the tracks there is an aluminium crosspiece that also continues on vertical walls, forming a surround. The frames of the doors and glass retention supports are made in aluminium with a square cross-section, fitted with soft grey or black PVC sealing strips, and are attached to this surround with snap-on clips. Walls are composed essentially of glazed modules composed of laminated glass with a thickness of 5+5 mm and internal PVB of 0.38 mm, the thickness of which can be increased if necessary according to customer needs. To avoid interrupting the continuity of glazed surfaces, vertical joints between glass panels are made using special profile sections in transparent polycarbonate, to which double- sided adhesive tape is applied to achieve perfect joints between the glazed panels. Joints at right angles and three-way joints are made in a similar way, using transparent polycarbonate or extruded aluminium profile sections. Fly monolith walls can compensate for any unevenness of floors or ceilings up to ± 10 mm. Hinged door modules consist in an adjustable internal frame with rabbet, fitted with a soft cushioned PVC perimetral sealing strip, grey or black in colour, and a pair of aluminium cover frames with a square cross-section, which are fixed to the structure with snap-on clips. Door modules are supplied fitted with lever handles as standard, complete with lock and adjustable aluminium hinges opening though 175°. As an alternative, to give the maximum possible continuity to the glazed wall, special “spider” hinges in stainless steel are available, fixed directly to the glass to eliminate door uprights. Full doors are made with a hollow-core honeycomb interior faced with laminated plastic, for a total thickness of 41 mm, in the same finish as blind wall panels. Glass doors are made with a sheet of tempered glass with polished edges and a thickness of 10 mm, available in transparent, etched or screen-printed finishes, with the application of adhesive film to give the necessary privacy without totally blocking the view. Framed glass doors are made with a perimetral aluminium frame with a thickness of 100 mm or 15 mm. Tempered glass with a thickness of 6 mm or laminated 3+3 mm glass can be fitted, in the finishes described above. Full doors with glazing are made with a hollow-core honeycomb interior faced with laminated plastic, for a total thickness of 41 mm, in the same finish as blind wall panels, with an opening for the installation of laminated 3+3 mm glass, in the finishes described above, or double glazing in tempered glass with a thickness of 4 mm, inside which a Venetian blind with horizontally tilting slats can be fitted, operated by an external knob. In both solutions, glazing panels are fixed to the door with aluminium frames fitted with soft grey or black PVC sealing strips. Sliding door modules are not available for Fly walls, unless installed with a track on the exterior of the wall, fixed to a structure attached to the glazed wall. All exposed profile bars are supplied with an anodized silver aluminium finish as standard. They can also be painted in the various RAL colours by customer request.