- Time monolith partition walls
Technical Data - Summarizing Catalog
- Technical Description
are composed of a perimetral structure in extruded aluminium fitted with a soft grey PVC sealing strip. The fixed upper crosspiece and the lower crosspiece with snap-on fittings, which act as glass retention supports, have a square cross-section of 40×50 mm, and are fixed to the floor and ceiling with expansion plugs.
are composed of a perimetral structure in extruded aluminium fitted with a soft grey PVC sealing strip. The fixed upper crosspiece and the lower crosspiece with snap-on fittings, which act as glass retention supports, have a square cross-section of 40×50 mm, and are fixed to the floor and ceiling with expansion plugs. The extruded aluminium uprights, with a square cross-section of 50×25 mm, are fixed to the wall with expansion plugs and to the upper and lower structure with special L-shaped brackets. Walls are composed essentially of glazed modules composed of laminated glass with a thickness of 5+5 mm and internal PVB of 0.38 mm, the thickness of which can be increased if necessary according to customer needs. To avoid interrupting the continuity of glazed surfaces, vertical joints between glass panels are made using special profile sections in transparent polycarbonate, to which double- sided adhesive tape is applied to achieve perfect joints between the glazed panels. Joints at right angles and three-way joints are made in a similar way, using transparent polycarbonate or aluminium profile sections. Time monolith walls can compensate for any unevenness of floors or ceilings up to ± 10 mm.
Hinged door modules consist in a single frame in aluminium with a square cross-section that includes both the closure rabbet with a soft cushioned PVC perimetral sealing strip, grey or black in colour, and the upright of the glazed wall, fitted with a soft grey PVC sealing strip.
Door modules are supplied fitted with lever handles as standard, complete with lock and adjustable aluminium hinges opening though 175°. As an alternative, to give the maximum possible continuity to the glazed wall, special “spider” hinges in satin-finished steel are available, fixed directly to the glass to eliminate door uprights.
Full doors are made with a hollow-core honeycomb interior faced with laminated plastic, for a total thickness of 41 mm, in the same finish as blind wall panels.
Glass doors are made with a sheet of tempered glass with polished edges and a thickness of 10 mm, available in transparent, etched or screen-printed finishes, with the application of adhesive film to give the necessary privacy without totally blocking the view.
Framed glass doors are made with a perimetral aluminium frame with a thickness of 100 mm or 15 mm. Tempered glass with a thickness of 6 mm or laminated 3+3 mm glass can be fitted, in the finishes described above.
Full doors with glazing are made with a hollow-core honeycomb interior faced with laminated timeplastic, for a total thickness of 41 mm, in the same finish as blind wall panels, with an opening for the installation of laminated 3+3 mm glass, in the finishes described above, or double glazing in tempered glass with a thickness of 4 mm, inside which a Venetian blind with horizontally tilting slats can be fitted, operated by an external knob. In both solutions, glazing panels are fixed to the door with aluminium frames fitted with soft grey or black PVC sealing strips.
Sliding door modules are made with a sheet of tempered glass with polished edges and a thickness of 10 mm sliding on runners with nylon wheels and ball bearings on the upper crosspiece. At the bottom a track fixed to the floor allows the door to slide correctly. Sliding doors are opened and closed with a vertical handle in satin-finished steel with a lock at floor level, or with a vertical handle in satin-finished steel without a lock, with a smaller cross-section and height than the previous version.
All exposed profile bars are supplied with an anodized silver aluminium finish as standard. They can also be painted in the various RAL colours by customer request.