- Omega Dv modular partition walls
Technical Data - Summarizing Catalog
- Technical Description
have a total thickness of 86 mm, and are composed of uprights in galvanized steel with a thickness of 6/10, positioned inside two crosspieces in pre-painted 8/10 steel, fixed to the floor and ceiling with expansion plugs, or with double-sided adhesive tape if no holes can be drilled in floors.
have a total thickness of 86 mm, and are composed of uprights in galvanized steel with a thickness of 6/10, positioned inside two crosspieces in pre-painted 8/10 steel, fixed to the floor and ceiling with expansion plugs, or with double-sided adhesive tape if no holes can be drilled in floors. The structure is designed to contain all types of cable for power, telephones, etc, with 2 slots with dimensions 35×24 mm on every upright. Omega modular walls can compensate for any unevenness of floors or ceilings up to ± 15 mm. Walls are assembled by fixing the melamine panels, door frames and glass retention frames to the uprights using special “Omega” profile bars. Special joint covers in rigid grey or black PVC are fitted into the “Omega” profile bars to finish the wall, making the surface flush. As the glass retention frames are provided at the top and bottom with a recess into which panels are inserted directly, they exclude the use of crosspieces and exposure of the joint. To improve noise insulation, specially designed noise-absorption and heat insulation material can be inserted inside the wall, composed of totally recyclable and non-toxic 100% polyester, allowing a noise reduction of up to 40 dB at frequencies of 500 Hz to be certified in optimal site conditions. Blind modules are made from chipboard panels, supplied as standard in Class E1 with low formaldehyde emissions compliant with UNI standards, coated with a wax finish with a scratch- resistant, non-reflective and washable surface and a thickness of 12 mm, without edgings. Glazed modules are composed of a sheet of laminated glass with a thickness of 3+3 mm, partially flush with the blind panels, positioned in an aluminium frame with snap-on glass retention bars with a square cross-section. The space between the two glass panes can accommodate an internal Venetian blind with 15 or 25 mm slats, available in various finishes to match the colours of walls or profile bars, and with horizontal tilting controlled by the external knobs provided. Hinged door modules consist frame with a closure rabbet, fitted with a soft cushioned grey or black PVC sealing strip. Door modules are supplied with a Meroni lock and press-to-open handles, and are complete with adjustable aluminium hinges opening through 175°. Full doors are made with a hollow-core honeycomb interior faced with laminated plastic, for a total thickness of 41 mm, in the same finish as blind wall panels. Glass doors are made with a sheet of tempered glass with polished edges and a thickness of 10 mm,available in transparent, etched or screen-printed finishes, with the application of adhesive film to give the necessary privacy without totally blocking the view. Framed glass doors are made with a perimetral aluminium frame with a thickness of 100 mm or 15 mm. Tempered glass with a thickness of 6 mm or laminated 3+3 mm glass can be fitted, in the finishes described above. Full doors with glazing are made with a hollow-core honeycomb interior faced with laminated plastic, for a total thickness of 41 mm, in the same finish as blind wall panels, with an opening for the installation of laminated 3+3 mm glass, in the finishes described above, or double glazing in tempered glass with a thickness of 4 mm, inside which a Venetian blind with horizontally tilting slats can be fitted, operated by an external knob. In both solutions, glazing panels are fixed to the door with aluminium frames fitted with soft grey or black PVC sealing strips. Sliding door modules slide on an aluminium track on runners with nylon wheels and ball bearings fitted externally to the wall. Doors can be in the finishes described above, with the option of choosing between inset handles or T-bar handles in satin-finished steel, complete with lock. All exposed profile bars are supplied with an anodized silver aluminium finish as standard. They can also be painted in the various RAL colours by customer request. Omega Dv partition walls can be modular in either a vertical or horizontal direction, with elements of various dimensions for each specific project. Elements can be moved or readapted to any position and at any time, according to the particular needs of the user.